Products

Contact Us
+86 0731 22995411
ejcarbidetool.com
Carbide End Mill
Home > Carbide End Mill
Carbide Ballnose Aluminum Processing Endmill D16
Carbide Ballnose Aluminum Processing Endmill D16

Carbide Ballnose Aluminum Processing Endmill D16

With a wide range of carbide ball nose aluminum processing endmill in stock.
We can also do the ball nose aluminum processing endmill as per customers’ needs.
INQUIRY
Description
Carbide Ballnose Aluminum Processing Endmill
With standard size in stock, also produce as customer's needs.

Materials: Solid Carbide(Tungsten Steel)
Helix Angle: 30°， 35°,45° or as customer's choice
Dimensions: Diameter 1mm to 28mm,can also do as customized.
Flute:2 flutes,3 flutes,4 flutes.

Application:
Aluminum,aluminum alloy,copper,beryllium copper and other non-ferrous metals.
carbide ball nose aluminum processing endmill
Dimensions for Carbide Ballnose Aluminum Processing Endmill (mm):
Code            Cutting Diameter  Shank diameter  Cutting length    Total length   
EY44-0100 4 4 8 50
EY44-0200 5 5 10 50
EY44-0300 6 6 12 50
EY44-0500 7 7 14 60
EY44-0600 8 8 16 60
EY44-0800 9 9 18 75
EY44-1000 10 10 20 75
EY44-1200 12 12 24 75
EY44-1400 14 14 28 75
EY44-1600 16 16 32 100
EY44-2000 20 20 40 100
Aluminum alloy with a higher strength and hardness compare to pure aluminum,but compare with steel,aluminum alloy with a lower strength and hardness,small cutting force and with good thermal conductivity.all types of aluminum alloy with a soft state,the processing difficulty is aluminum with higher plasticity,easy sticky knife,difficult to obtain a good surface quality.
In the high-speed cutting edge may produce welding phenomenon, the tool loss cutting capacity, affecting the processing accuracy and surface roughness. In addition, aluminum alloy with high thermal expansion coefficient,easily lead to hot deformation of the workpiece, reducing processing accuracy.
We usually choose micro grain carbide grade for aluminum processing end mills to ensure endmill with sharp edge and good wear resistance.
As solid carbide end mill with a very sharp cutting edge and groove type,show small cutting force when processing aluminum,and has a large chip space,good chip removal,so solid carbide be widely used for aluminum processing.in addition, In addition, the elastic modulus of the cement is about three times that of steel, which means that the overall carbide cutting tool is only one-third the amount of the indexable tool under the same load. The overall carbide end mill can also be made of spiral edge, so that you can smoothly cut and cut out, chip removal is also very smooth, which will help reduce the cutting force fluctuations to suppress the resulting Vibration trend.
EJ Carbide aluminum processing endmill including:3 flutes aluminum flat end mill,2/3 flutes extralarge square end mill,2/3 flutes ball nose aluminum processing end mill,with a wide range of carbide endmill in stock,also produce as customized.

packing for carbide ballnose aluminum processing endmill

Related products

Review

1/3
X